AS5263
Datasheet - A p p l i c a t i o n I n f o r m a t i o n
An equal output of all read out data is sufficient to verify the OTP programming. If the data output is a mismatch, then the programming of the
OTP was not successful and can cause a change of the OTP register content during operation over temperature and life time.
8.2.3
Physical Placement of the Magnet
The best linearity can be achieved by placing the center of the magnet exactly over the defined center of the chip as shown in Figure 26 .
Figure 26. Defined Chip Center and Magnet Displacement Radius
Defined
center
R d
Area of recommended maximum
magnet misalignment
8.2.4
Magnet Placement
The magnet’s center axis should be aligned within a displacement radius R d of 0.25mm (larger magnets allow more displacement) from the
defined center of the IC.
The magnet may be placed below or above the device. The distance should be chosen such that the magnetic field on the die surface is within
the specified limits (see Figure 26) . The typical distance “z” between the magnet and the package surface is 0.5mm to 1.5mm, provided the
recommended magnet material and dimensions (6mm x 3mm) are used. Larger distances are possible, as long as, the required magnetic field
strength stays within the defined limits.
However, a magnetic field outside the specified range may still produce usable results, but the out-of-range condition will be indicated by an
alarm forcing the output into the failure band.
Figure 27. Vertical Placement of the Magnet
N
S
z
0.561mm
±0.075mm
www.austriamicrosystems.com/AS5263
Die surface
Die 1
Die 2
Revision 1.4
Package surface
0.850mm
nom.
33 - 37
相关PDF资料
AT 150 B420L SENSOR CURRENT 150A 30V MOD
AT 150 B5 SENSOR CURRENT 150A MOD
AT 20 B10 SENSOR CURRENT 20A MOD
AT-7666A SENSOR AMORPHOUS 146X167.5X0.3
AT094 PCB ADAPTER FOR DSA01
AT86RF212-ZUR TXRX AVR LOW PWR/VOLTAGE 32PQFN
AT86RF231-ZFR TXRX LOW POWER 2.4GHZ 32VQFN
AT86RF232-ZX 2.4 GHZ ZIGBEE TRANSCEIVER
相关代理商/技术参数
AS5263-QF_EK_AB 功能描述:AS5263 - Magnetic, Rotary Position Sensor Evaluation Board 制造商:ams 系列:- 零件状态:有效 传感器类型:磁性,旋转位置 感应范围:360° 接口:模拟和数字 灵敏度:- 电压 - 电源:4.5 V ~ 5.5 V 嵌入式:否 所含物品:板 使用的 IC/零件:AS5263 标准包装:1
AS5263-QF_EK_DB 功能描述:AS5263 - Magnetic, Rotary Position Sensor Evaluation Board 制造商:ams 系列:- 零件状态:有效 传感器类型:磁性,旋转位置 感应范围:360° 接口:模拟和数字 灵敏度:- 电压 - 电源:5V USB 或 9V 嵌入式:是,MCU,8 位 所含物品:板 使用的 IC/零件:AS5263 标准包装:1
AS5263-QF_EK_PB 功能描述:AS5263 - ZIF Socket 制造商:ams 系列:- 零件状态:有效 模块/板类型:ZIF 插口 配套使用产品/相关产品:AS5263 标准包装:1
AS52670FLF 制造商:TT Electronics / IRC 功能描述:AS52670FLF
AS52670HLF 制造商:TT Electronics / IRC 功能描述:AS52670HLF
AS52670JLF 制造商:TT Electronics / IRC 功能描述:AS52670JLF
AS52671FLF 制造商:TT Electronics / IRC 功能描述:AS52671FLF
AS52671HLF 制造商:TT Electronics / IRC 功能描述:AS52671HLF